Instruction manual

9
Troubleshoong
Problem Cause Troubleshoong method
The running machine stops
suddenly
 Check to see if the
power plug is
properly inserted
 The quanty of
materials put into the
machine is too large.
 Hard fruits and
vegetables are not
cut small enough
 Insert the plug
correctly
 Press “R” for 2-3
seconds then
“ON” (repeat the
process). If it sll
does not run please
clean the machine
and try again.
 Hard fruits and
vegetables should be
cut into smaller
pieces .
The juice amount is small or
juice ows out of the main
frame
 Dry materials stored
in refrigerator are
used for squeezing
 The juice amount will
increase if the
materials are
squeezed aer being
immersed in clear
water for sucient
water absorpon
There is an abnormal noise
 Accessories are not
properly installed
 The machine is put on
a non smooth surface
 Parts cause extrusion
sound during
squeezing
Ensure the accessories are
installed properly
Please put the machine on a
at surface
Due to the extrusion of
vegetables
The container and
accessories are dyed aer
use
Wash according to the
cleaning instrucons