Instruction manual
6
Assembling the appliance
1. Place the motor unit (10) onto a at secure surface ensuring that the sucon
feet sck to the work surface.
2. Fit the aachment with both the Juicer spout (6) and pulp spout (7) onto the
motor unit (10) so that the three securing locks on the motor unit t
correctly.
3. Aach the spiral juicer aachment into the strainer (3) and t the strainer
holder (4) onto the outside of the strainer.
4. Once the aachments are ed together correctly, place them into the
spout unit so that the spiral aachment slots into the hole in the motor unit
(10).
5. Fit the hopper plate onto the top of the unit and rotate it clockwise to
ensure it is locked into posion.
6. Place the pulp jug (9) and juice jug (8) under the appropriate spouts (6 & 7).
Important
If the hopper (2) and unit are not correctly assembled the juicer will not operate
due to a safety feature.