User Manual
26
Plug
The plug must be protected by the correct AMP fuse; this will be indicated on the
case of the plug. Only BSI or ASTA approved fuses should be used. When changing
the fuse always replace it with a fuse that is of the same idencal rang as the
original. If you are unsure about which plug or fuse to use, always refer to a
qualied electrician. Please note aer replacing the fuse, ensure that the cover is
correctly ed back onto the plug. Never aempt to run the appliance if the plug
does not have a cover. If a moulded plug is ed and has to be removed take great
care in disposing of the plug and severed cable, it must be destroyed to prevent it
from engaging into a socket. If the supply cord is damaged it must be replaced by a
service agent or a similarly qualied person.