User Manual
7
If the blades stall for more than 5 seconds a safety overload switch will operate
and automacally turn the machine o. Before re-starng the appliance allow a
cooling period of 1 minute. Press the overload switch and then push the on/o
switch to re-start the machine.
If the cung mechanism of the appliance strikes a foreign object or if the
appliance starts making any irregular or unusual vibraons or noise immediately
switch o the appliance and allow the cung means to stop. Remove the power
cord from the mains supply, then proceed as follows:
- Inspect the appliance for damage
- Replace of repair any damaged parts
- Check for and ghten any loose parts
- Remove any debris that becomes clogged
Always keep the motor cooling vents free from debris and other materials to
prevent any damage from occurring to the motor. Also ensure that the collecng
bag does not cover the cooling vents during use.
When you have nished using the appliance always switch the appliance o and
remove the electrical cord from the mains supply.