User Manual
5
Assembling the appliance
1. Turn the appliances main body on its head.
2. Insert the axel through both of the holes located on the foot. (Fig 3)
3. Place a spacer onto either end of the inserted axel.
4. Insert the wheels onto the axel. Ensure that the wheels are inserted the correct way so
that the outsides of the wheels can t the wheel cover. (Fig 5)
5. Place a spacer into the inner wheel and insert the split pin into the two ridges of the
wheel so that the spacer stays in place.
6. Aach the wheel cover.
7. Insert the foot into the body of the appliance, so that the wheels are in line with the back
of the appliance. (Fig 4 and Fig 1).Fix the foot to the body of the appliance using two cross
head screws.
8. Ensure that the securing knob (Fig 6) is fully ghtened. If the securing knob is not
correctly ghtened, a safety switch will be acvated in the motor prevenng it from
starng.