User Manual

Plug

The plug must be protected by the correct AMP fuse; this will be indicated on the case

of the plug. Only BSI or ASTA approved fuses should be used. When changing the fuse

always replace it with a fuse that is of the same idencal rang as the original. If you

are unsure about which plug or fuse to use, always refer to a qualied electrician.

Please note aer replacing the fuse, ensure that the cover is correctly ed back onto

the plug. Never aempt to run the appliance if the plug does not have a cover. If a

moulded plug is ed and has to be removed take great care in disposing of the plug

and severed cable, it must be destroyed to prevent it from engaging into a socket. If the

supply cord is damaged it must be replaced by a service agent or a similarly qualied

person in order to avoid a hazard.

All of our electrical appliances conform to pre-exisng EC Direcves 2006/95/EC (Low

Voltage Direcve) and 2004/108/EC (EMC Direcves).

For further informaon please visit hp://www.esc.org.uk/industry/product-safety/

product-tesng-screening/kitchen-appliances/