User Manual

Replacing the blades of the appliance

Note: Please wear work gloves when changing the blades.

1. Ensure that the appliance is switched o and the power cord is disconnected

from the mains supply.

2. Remove the top of the appliance by unscrewing the “securing knob” located on

the main body of the appliance.

3. The blades have two cung edges, when the blades have become worn, reverse

the blades to use the second cung edge.

4. Lock the blade disc using a hex spanner. Unscrew the two inner hexagonal

headed screws and note the cung angle of the blade (Fig 10).

5. Remove the blade and rotate it 180˚ and t the blade to the blade disc ensuring

that the ground cung edge is facing downwards (Fig 10).

6. Repeat the same process for the other blade.

Note:

-When one cung blade has worn out both must be replaced as a pair.

-The cung blades can be re-sharpened, this must be carried out by an experienced

professional using an oil stone.

-However, we recommend purchasing new blades as faulty discs may cause an

imbalance in the appliance.