User guide

Before using the appliance
 Ensure that all parts and accessories are in working condion.
 Run only clean water through the appliance to remove any dirt. This can be done
by lling the water reservoir with water, plugging the appliance into to the mains
and following the steps found in the secon of the manual “operang the
appliance”.
 Repeat the process at least twice to ensure the appliance is fully cleaned.
Operang the appliance
 Open the tank cover (3) and pour the required amount of water into the water
tank, we recommend using the tempered glass jug (13) to measure the amount
of cups of coee you wish to make . The level of water can be indicated by the
water gauge (6). Please note the coee produced will be less than the amount of
water you originally put in the water tank therefore always add 1 extra cup for
example if you wish to produce ten cups of coee add the equivalent of 11 cups
to the water tank.
 Press the funnel key buon (5) once and rotate the funnel support (12) to the le
unl it is locked in place. Place the funnel (10) and coee lter (12) into the
funnel support and rotate it unl it locks into place and return it to its original
posion.
 Li o the coee grinder cover (1) and ll the grinder box (2) with coee beans
(maximum 200g of coee beans). Place the grinder cover (1) back on the grinder
box (2) ensuring it is securely in place.
 Plug the appliances power cord into the electrical supply. The LCD display will
ash and now display 12: 00 automacally. Set the correct me by pressing the
hour (19) and minute buons (20).
 Then select the amount of cups you wish the coee machine to produce by
pressing the cup 2-12 buon (18). The LCD display (14) will now show the
amount of cups you want to produce ranging form 2-12, press the cups buon to
increase the amount of cups in two’s. if you do not select the required amount of
cups it will be set at a default of 12 cups. Turn the knob (9) to choose how coarse
you wish the ground coee to be. We recommend using a medium seng.
 Press the “Strength control” (17) to increase or decrease the strength of the