Instruction Manual

Before using the appliance
Run clean water through the appliance to remove any dirt. This can be done by
lling the water reservoir with water, plugging in the appliance to the mains and
pressing the on/o buon. The red brewing light will now come on. Wait ll all
the water has passed through the machine and empty the tempered glass bowl.
Seng the coee makers clock
Press the Programme buon (10) the clock is now displayed on the screen.
Press the hour and minute buons (5-6) unl the correct me is reached.
Press the programme buon (10) twice to exit the clock seng programme.
Operang the appliance
1. Open the water reserve lid (1) and pour water into the water reserve. Make sure
the water level is above minimum and below maximum, the maximum amount
of water is 10 cups (approx.)
2. Place a lter paper or the permanent lter supplied into the cavity of the lter
folder (3) . Add the desired amount of coee using a scoop.
3. Put the tempered glass bowl on the heang plate.
4. Close the lid of the water reserve and plug the appliance into the mains supply.
5. Press the appliances “On/O buon” (11) the red brew light (9) will illuminate,
indicang that the appliance is brewing.
6. Allow the coee to fully drip into the tempered glass bowl.
7. The appliance will automacally keep the coee warm for 2 hours, this will be
indicated by the brew light remaining on.
8. If you wish to serve the coee before all the coee has brewed the automac
drip mechanism (13) will prevent any coee from being wasted. Just remove the
tempered glass bowl (4) and serve.
9. Wait unl the brewing process has nished and the lter is empty of water
before removing the tempered glass bowl.
10. To shut o your coee maker manually before the 2 hour keep warm funcon
has nished , press the On/O buon twice unl both lights are turned o.