User Manual

6
Assembly of the glass jug (Please refer to the illustraon on page 5)
1. Put the rubber sealing ring (4) on the inner edge of the blade unit (6).
2. Put the blade unit (5) into the sealing ring and press the ring into the cup
base (6).
3. Mount the glass cup (3) onto the cup base unit and turn the cup base unit in
a clockwise direcon unl it is xed.
4. Aer pung the ingredients in the cup, x the lid (2) onto the cup. Please
ensure that it is securely ed.
5. Insert the inner cover (1) into the opening of the lid and turn it in a clockwise
direcon unl it is locked.
Inserng the glass jug
 Make sure that the blender is switched o (switch to the “0” seng).
 Place the jug assembly (7) onto the motor block (8).
Using the appliance
1. Place the ingredients you wish to process into the glass jug.
2. Put the lid on the glass jug and close it securely. Place the inner cover into
the hole in the lid and turn it clockwise to lock it.
3. Switch on the motor block with the toggle switch or push switch (please refer
to the table located on page 7 for a reference to sengs).
4. Aer using the blender, always move the switch into the “0” seng and
unplug the appliance from the mains outlet. To remove the glass jug just li
it up to remove it.
7
Table of speed sengs
Helpful ps
 To achieve the best results when pureeing solid ingredients, place small
porons into the glass jug one by one instead of placing a large quanty all
at once.
 If you are processing solid ingredients, cut them into small pieces (2-3cm)
rst.
 When mixing solid ingredients start o with a small amount of liquid and
gradually add more liquid through the opening in the lid.
 Always place your hand on top of the blender when you are operang the
device.
 Be careful when processing hot liquids.
 When srring solid or thick ingredients it is recommended to use the
blender on the pulse (P) mode to prevent the blades from becoming stuck.
Speed seng Use
Posion 1 For light usage with liquids
Posion 2 For a more solid consistency i.e. for
mixing liquids and solid foodstus
Posion pulse P For ice crushing & short, powerful
impulse movements (you have to push
the posion pulse switch repeatedly)