User Manual

2
Contents page
Important safeguards Page 3
Appliance specic safety instrucons Page 4
Appliance components illustraon Page 5
Assembly of the glass jug Page 6
Inserng the glass jug Page 6
Using the appliance Page 6
Table of speed sengs Page 7
Helpful ps Page 7
Cleaning Page 8
UK and EU Guarantee Page 9
Electrical informaon Page 10
Disposal of the appliance Page 12
11
Electrical Informaon
Please note:
It is extremely important that the wires or cores in the ex are connected to the
correct terminals in the plug. If the colour of the mains lead of the appliance does
not correspond with the coloured markings idenfying the terminals in your plug
proceed as follows:
 The Live (Brown) wire
connects to the right-
most live (L) terminal
nearest to the fuse.
 The Neutral (Blue) wire
connects to the le-
most neutral (N)
terminal.
 The Earth (Green and
Yellow) wire connects
to the central, top most
earthed (E) terminal.
Warning:
If the appliance is double insulated, indicated by the double insulated symbol:
it should not have an earth wire or earth connecon.
Plug
The plug must be protected by the correct AMP fuse; this will be indicated on the
case of the plug. Only BSI or ASTA approved fuses should be used. When changing
the fuse always replace it with a fuse that is of the same idencal rang as the
original. If you are unsure about which plug or fuse to use, always refer to a
qualied electrician.
Please note aer replacing the fuse, ensure that the cover is correctly ed back
onto the plug. Never aempt to run the appliance if the plug does not have a cover.
If a moulded plug is ed and has to be removed take great care in disposing of the
plug and severed cable, it must be destroyed to prevent it from engaging into a