User Manual

ManualsBrandsAndrew James ManualsBlendersAJ000475 Retro Blender

Disposal of the appliance

Please note that this Andrew James product is marked with this symbol:

This means that this product must not be disposed of together with

ordinary household waste, as electrical and electronic waste must be

disposed of separately.

In accordance with the WEEE direcve, every member state must ensure correct

collecon, recovery, handling and recycling of electrical and electronic waste.

Private households In the EU can take used equipment to special recycling staons

free or charge. In certain member states used apparatus can be returned to the

dealer where they were bought on the condion you buy new products. Contact

your retailer, distributor or the municipal authories for further informaon on

what you should do with electrical and electronic waste.

Please read the manual fully before using the appliance and keep the

manual safe for future reference.

Retro Blender

Summary of content (6 pages)

PAGE 1
Disposal of the appliance Please note that this Andrew James product is marked with this symbol: This means that this product must not be disposed of together with ordinary household waste, as electrical and electronic waste must be disposed of separately. In accordance with the WEEE directive, every member state must ensure correct collection, recovery, handling and recycling of electrical and electronic waste.
PAGE 2
Electrical Information Contents page Please note: Important safeguards Page 3 Appliance specific safety instructions Page 4 Appliance components illustration Page 5 Assembly of the glass jug Page 6 Inserting the glass jug Page 6 Using the appliance Page 6 Table of speed settings Page 7 Helpful tips Page 7 It is extremely important that the wires or cores in the flex are connected to the correct terminals in the plug.
PAGE 3
socket. If the supply cord is damaged it must be replaced by a service agent or a similarly qualified person in order to avoid a hazard. All of our electrical appliances conform to pre-existing EC Directives 2006/95/EC (Low Voltage Directive) and 2004/108/EC (EMC Directives). Important safeguards When using any electrical appliance, basic safety precautions should always be followed including:  For further information please visit http://www.esc.org.
PAGE 4
  place the unit on a hot surface. Always remove the plug of the appliance safely. Do not pull on the appliances cord to remove the appliance plug from the electrical socket. Never handle or operate the appliance with wet hands. Appliance specific safety instructions          The cutting blades are very sharp, handle the blender with extreme care and caution. The blender will only work if the blender has been correctly inserted into the motor block.
PAGE 5
Cleaning  Appliance components illustration Do not immerse the motor block in water or any other liquid for any reason. To clean the motor block wipe it with a moist cloth and dry. Jug  Empty the glass jug and fill it with water.  Place the glass jug on the motor block and turn the push switch several times.  Empty the glass jug and rinse it until it is clean.
PAGE 6
Assembly of the glass jug (Please refer to the illustration on page 5) 1. Put the rubber sealing ring (4) on the inner edge of the blade unit (6). 2. Put the blade unit (5) into the sealing ring and press the ring into the cup base (6). 3. Mount the glass cup (3) onto the cup base unit and turn the cup base unit in a clockwise direction until it is fixed. 4. After putting the ingredients in the cup, fix the lid (2) onto the cup. Please ensure that it is securely fitted. 5.