Instruction Manual

7
12. When the me has elapsed, the machine will stop automacally, unplug the
machine and remove the power unit/lid. The ice cream is now ready to
serve.
Important informaon
 Do not stop and start the machine during the freezing process as the mixture
may freeze when it comes into contact with the bowl and prevent the
paddle from moving.
 To avoid overheang the motor, the direcon of rotaon will change if the
mixture becomes too thick. If the rotaon of the paddle connues to change
direcon, stop the machine when the mixture is ready.
 In the unlikely event of the motor overheang, a safety cut out will operate
causing the motor to stop. If this happens, unplug the machine and allow the
power unit to cool down.
 To gain the best results when using the ice cream maker, the paddle will
come into contact with the inside of the inner bowl when the paddle moves.
 The Ice cream produced should be so in texture. This can be transferred to
a separate container for storage in the freezer or If you wish to rm the ice
cream before eang it.
 Do not use metal utensils to remove the mix from the bowl.
 Do not remove the inner bowl from the freezer unl it is ready to make ice
cream.