Instruction Manual

6
4. Lower the assembled lid/power unit/ paddle into
the bowl, it will then click into place.
5. Insert the plug into the outlet, a
beep will signal the appliance is
assembled correctly. The running
me “20:00” will be displayed on
the LCD display.
6. Each me the reset buon is pressed one minute will be added to the
running me. This is signalled with a “beep”. You can choose the running
me from 20-40 minutes.
7. Each me the power buon is pressed, the machine is changed with a
“beep” in the sequence.
8. Press the power buon aer the running me is set. The machine will now
turn on, the remaining me is indicated on the LCD and counts down at
once.
9. Before adding the mixture you can stop the machine and reset the running
me.
10. Pour the ice cream or sorbet mix down the chute into the inner bowl. When
pouring mixture into the bowl, always stop at least 5cm (2 inches) from the
top as the mixture will increase in volume during the freezing process.
11. Allow the mixture to churn unl frozen or the desired consistency has been
reached. This can take 15-30 minutes, but most recipes will be ready in less
me.