User Manual

8
How to operate your food dehydrator
1. Safely place the appliance on a at and level surface. Load and insert the
trays, then insert the plug into the electrical outlet.
2. To adjust the temperature press the “TEMP” buon and select the
temperature you require. To change the temperature in singular digits, press
the buon without holding it. To increase the temperature rapidly hold the
buon.
3. Set the desired amount of me by pressing and holding the “Timer” buon.
The number displayed in the digital display represents the number of hours
the appliance will operate at before automacally turning o. When
pressing the buon, the digital display will cycle from 1 hour through to 48
hours then restart at 1 again. Individual presses of the buon will advance
the count by one hour. Holding the buon will advance the me quicker.
4. Press the ON/OFF buon to begin the programme cycle. The colon in the
mer display will begin to ash indicang it is running. The display shows the
remaining me of operaon in the format HH MM. You will also hear the fan
operang.
5. The appliance will stop automacally when the me expires or you can stop
it any me using the ON/OFF buon. Remove the plug from the outlet.
If you wish to add more me during the cycle or if you want to change the set
temperature, press the ON/OFF buon once to stop the process, change the
desired seng as described above and then restart it by pressing the ON/OFF
switch again.