Owner's manual

7
General Operaon
Filling the bowl with Food
1. Disassemble the appliance according the secon “Disassemble”.
2. Fill the feeder base (D) trays 1-6 with food.
3. Re-assemble the appliance according to the secons “Re-assembling the
appliance ”
Seng the current Clock Time
1. During Clock display mode, press and hold the SET key for (2 seconds) to
enter Clock SET mode. The hour number will now be blinking.
2. Press the MODE key to increase the hour. Once you have set the hour, press
the SET key to conrm the hour. The minute number will now blink.
3. To change the minute number, press the MODE key to increase the minute.
Once you have set the minute, press the SET key to conrm the minute.
Both the hour and minute numbers will now blink.
4. If needed, Press the MODE key to change between 12 or 24 hour me.
5. Press the SET key to conrm your current me seng and the numbers will
stop blinking.
Seng the Feeding Time
1. Aer seng the clock me, press the MODE key one me. (1 1) will show
on the display. This is feeding me display mode.
2. Now press and hold the SET key for (2 seconds) to enter Feeding-me SET
mode. Feeding will start from the rst feeding number & me. The 1
st
digit
represents the feeding number (Food Tray 1)
3. The hour digits will now blink (2
nd
and 3
rd
digit). Press the MODE key to
increase the me, then press the SET key to conrm the me you set.
4. Aer conrming the 1
st
feeding me, the next feeding number & me will
show on the display. (1
st
digit will change to the next feeding number, e.g.
Food Tray 2 or 3 or 4 or 5 or 6 and back to 1) To change the feeding me,
repeat step 3.
5. Repeat step 3 unl all 6 feeding mes for each Food Tray are set. The display
will change back to clock display mode when all 6 feedings have been set.
1
st
dig- 2
nd
dig- 3
rd
dig-
Feeding
Number
Feeding
Time