Owner's manual
6
Disassemble
The appliance should already come fully assembled.
1. Unlock both locks (F) by pressing down on the locks and liing them up.
2. Remove the lid “A” from the appliance.
3. Remove the slide cover “B”.
4. Remove the feeder base “D”.
Re-Assembling the appliance
1. Place the feeder base “D” into the base of the appliance “G” so that it aligns
and ts correctly with the base locking system “E”.
2. Fit the slide cover “B” into the appliance.
3. Align the lid (A) with the locks (F) and secure the locks by pushing them
downwards.