Owner's manual
10
Notes & FAQ:
When the bowl is rotang both the clock seng and mode seng are not
allowed.
Under clock display mode the colon icon (:) will ash. The colon icon (:) is
turned O when in feeding mer mode.
A PM icon will be displayed in the aernoon under 12-hour clock mode
and turned o in the AM. The PM icon will not be displayed under 24 hour
clock mode.
In feeding mer mode, three numbers will show up, the rst number is the
feeding number (1,2,3,4,5 or 6) and last two digits indicate the feeding
me in hours.
When the feeding mer starts, the BELL icon will turn On. Under feeding-
mer display mode a solid BELL icon means the feeding me has already
passed. A ashing BELL icon means the feeding me has not been
reached. This lets the user know how many feedings are le for feeding.
If the me for the next feeding is set earlier than the present feeding me,
the feeding will start the next day.
If the Mode key is pressed and held for more than 2 seconds the number
will rapidly increase automacally unl you release the key. When number
reaches its maximum, the number will fall back to the minimum value and
start increasing again.
If the feeding mer has already begun, pressing the START key will reset
the mer and begin again from the 1
st
feeding-me set.
If START TOMORROW key is pressed, both the BELL and Zz icon will be ON.
The Zz icon will turn OFF at 0:00 midnight to indicate the mer has
started.
START TOMORROW is used should you want to set your feeder up today
and have it start tomorrow. This is good for when you have programmed
feeding mes that have yet to pass so you can prepare in advance for a
possible trip or just being away the next day and not wanng the feeder to
run the day you programmed it.