Owner manual

9. Screw the cord of the appliance into the base of the appliance using the

ngs provided.

10. Plug the appliances electrical cord into the power supply, switch the

appliance on and select one of the three heat sengs.

Operang the appliance

 Connect the power cable to a 13 amp supply that is located in a safe, dry

area.

 The switch on the heater head is used to control the three heat seng.

(I) = 900W

(II) = 1200W

(I & II) = 2100W

 Although the pao heater is shower proof, do not use the pao heater when

it is raining or in wet condions.

 Always disconnect the power cable from the electrical supply, when the

pao heater is not in use.

Care and maintenance

 When disconnected from the electrical supply, clean the outside of the pao

heater with a damp cloth. Never use corrosive or solvent cleaners or

immerse the appliance in water.

 Any maintenance or repairs including replacing the halogen tube should only

be carried out by a qualied electrician or by a recommended service centre.

 Once the appliance has been used, clean the appliance and store in a dry,

safe area. Cover the appliance aer use to prevent the appliance from

rusng.

 Do not store the appliance outside as this may cause the appliance to rust.