Instruction Manual

5
Operang Instrucons
 The appliance is designed to work using a standard household voltage only.
 Please check that the current indicated on the rang label corresponds to
the current of the mains socket.
Using the appliance
1. Place the ingredients into a bowl.
2. Set the speed control to the “0” posion.
3. Aach the beaters or aachments into the correct holes
located on the underside of appliance main body.
4. Insert the mains plug into the socket, place the beaters into
the bowl, then select the speed required on the speed
controls.
5. Please use slow speeds (1-2) to inially mix for around 30
seconds, then you can change to a higher speed sengs if
needed. The hand mixer must be switched o and le to rest
for 20 minutes aer 5 minutes of connuous use.
Please note
Failure to insert the correct aachment into the correct hole in the mixer will
result in the aachment becoming stuck. The beater aachments do not have a
stopper.
Please use the diagram above the holes on the appliance to indicate which
correct aachment to insert.