Owner manual

5
Before rst me use
Before using the appliance for the rst me, please remove all the various
packaging materials and wipe the unit with a slightly dampened cloth.
Operate the appliance without any food inside it when using it for the rst me.
This will burn o any residues le on during the manufacturing process.
 Posion the appliance so that it can be opened to its full extent.
 When the appliance is warming up always keep the lid closed.
 Apply a light coang of buer, margarine or cooking fat to the heang
plates using a brush or a cloth. This helps seal the heang plates and
should only be carried out once.
 During operaon, when the appliance is warming up and when the desired
temperature has been aained, the green operaon light goes out.
 When using the appliance for the rst me, the appliance may slightly
smoke and emit a small odour. This will not re-occur and is due to the
residues le on by the manufacturing process being burned o. This is
completely harmless and is not a cause for concern.
 Aer the appliance has gone through the above menoned process clean
the appliance fully as described in “cleaning and maintenance”.
Operaon
 Plug the device into a properly installed mains socket (the red and green
operaon lamp will light up) and switch the device on by turning the
adjustment knob to the right temperature level).
 The wae iron requires approx. 4-5 minutes to warm up.
 When the desired temperature has been aained, the green operang
light will go o.
 Now open the device and pour the wae baer inside.
 The heang plates include a non-sck coang. This means that pre-