Owner's manual

6
cookware heats up the hotplate.
 Do not heat up any unopened ns on the inducon hotplate. A heated n
could explode, therefore remove the lid beforehand.
 Scienc tests have proven that inducon hotplates do not pose a risk.
However, persons with a pacemaker should keep a minimum distance of 60
cm to the device while it is in operaon.
Operang the device
 Plug the lead into a suitable power outlet and an acousc signal will sound
 Place inducon compable cookware in the centre of the hotplate. Please
note you can test the suitability of the cookware by placing a magnet (such
as a fridge magnet) onto the boom of the cookware. If the magnet aaches
to the boom of the cookware, the cookware is suitable to use with the
inducon hob.
 Press the On/Standby key once, the LED display will show “L” and the power
indicator light will ash. The cooking funcon is now ready to be selected.
(Note: if no operaon is selected for 30 seconds aer pressing the On/
Standby key, the indicator light will automacally turn o).
 Press the funcon key once, the pre-set power stage “5” is selected and the
device will begin to heat.
 You can change the power seng with the arrow keys at any me from the
power range of 1-10.
 Press the funcon key a second me to select the temperature seng. The
pre-set temperature “120˚C” will automacally be selected.
 The temperature seng can then be changed from a range of 60-240˚C by
using the arrow keys.
 The inducon hob can be changed from the power level seng mode to the
temperature seng mode at any me during the operaon by pressing the
funcon key and selecng the desired funcon. The value last set in the
respecve operang mode will be stored upon switch over.
 Press the funcon key a third me and the me funcon will be selected.