Owner's manual

5
Installing the device
 Place the device on a stable and level surface.
 Never place the device on a ammable surface (e.g. table cloth, carpet, etc.).
 Do not block the venlaon slots of the device. This may overheat the
device. Keep a min distance of 5 to 10 cm to walls or other items.
 Do not place the inducon hotplate next to devices or objects, which react
sensively to magnec elds (e.g. radios, TV’s, cassee recorders, etc.).
 Do not place inducon hotplates next to open res, heaters or other sources
of heat.
 Make sure that the mains connecon cable is not damaged or squashed
beneath the device.
 Make sure that the mains connecon cable does not come into contact with
sharp edges and/or hot surfaces.
Commissioning the device
 Prior to connecng the device, check that the voltage indicated on the rang
plate corresponds to the voltage supply in your home. An incorrect
connecon may lead to serious damage to the device and injury to persons.
 The hotplates surface consists of temperature-resistant ceramics. If any
damage is visible, disconnect the device from the power supply immediately
and contact customer services.
 We recommend not placing metal kitchen utensils, cookware or pan lids,
knives or other metal objects on the hotplate. These may heat up when the
device is turned on.
 In order to avoid overheang, do not place any aluminium foil or metal
plates on the device.
 Do not insert any objects like wires or tools into the venlaon slots.
Aenon: this may cause electric shocks.
 Do not touch the hot surface of the ceramic eld. Please note: the inducon
hot plate does not heat up itself during cooking, but the temperature of the