Manual

12
Control Panel
Introducon of control panel.
The silkscreen may be subject to change without prior noce.
Starng the bread maker
As soon as the bread maker is plugged in you will hear a beeping noise. This
indicates that the bread maker is on and ready to use.
 “1 3:00” will appear in the display screen.
 The two dots in-between “3:00” will not ash constantly.
 The back light will shine for approximately 20 seconds.
 “1” in the display screen represents the default program seng, this is for
900g of dough at a “medium” default seng.
START/STOP BUTTON
 This secon will give instrucons on how to pause, start and stop the
selected program.
 To start a program, press the stop/start buon once. A short beep and
the two dots will ash, signalling the program is beginning to start.
 All other buons are inacve during a program cycle, apart from the
stop/start buon.
 To stop the program press and hold the stop start buon for more than
two seconds, a long beep will then signal the program has iniated the
close down procedure.