Manual

9
Seng the Number of Days to Feed
1. Press the DAY key and the le side of the LCD shows the number of days
your Automac Feeder will feed for unl it stops. The default seng of
(0) means the feeder will feed connuously and never stop.
2. To change the number of days to feed, press the DAY key then press and
hold the SET key (for 2 seconds) unl the days ash on the LCD.
3. Press the DAY key to change the number of days. Hold down the DAY key
to speed through the numbers.
4. If you set a number of days to feed (1 to 99 days) then at 6am aer the
last day the feeder Alarm will start beeping.
5. To repeat the same schedule without any changes, just press the START
key.
6. To feed connuously, set the number of days to 0.
Note:
 When the mer-icon and all the numbers on the LCD display are
connuously ON, the feeding schedule has started.
 Once a feeding schedule has started, you can force it to end by pressing
the SET and START keys together.
Record Voice Message to be played at feeding mes
Press and hold the REC key, the Red LED will turn on.
Speak your message. You have up to 6 seconds.
When nished, release the REC key.
Play back recorded Voice Message
Press the PLAY key.
Your recorded message will now play.
At each Feeding your recorded message will play and repeat 3 mes.