Manual

8
To review the sengs
1. Press the TIMER key to cycle through and view the feeding mes. Only the
feeding mes per day that are set will be displayed. Digit-1 is the feeding
number each day, Digit 3 & 4 are the feeding mes (in hours). Example: (1
07)=(1st feeding at 7am).
2. Press the VOL key once to view the volume/poron-size and feeding day
(s) remaining.
3. Press the DAY key to display feeding day(s) remaining.
4. Press the CLOCK key once to display the current me, the CLOCK icon will
now turn on.
Control Panel LCD Display
PM
TIMER
Digit-1 Digit-2 Digit-3 Digit-4
5. If no key is pressed for more than 8 seconds, the display will switch back to
show the next feeding me with the mer icon ashing.
Note:
Using the TIMER key to cycle through the feeding mes will only display the
number of feedings you set. The sequence will repeat aer the last one is
displayed.
Only the 1
st
feeding me will be displayed if you’ve set just 1 feeding.
A ashing mer-icon means the feeding-me has not been reached while a solid
mer icon means the feeding-me has already passed.
The volume and day display shares the same screen so Digit-1 & 2 are the feeding
day(s) remaining while Digit-4 is the Volume/Poron-size.