Manual

12
FAQ’S
1. The clock can display in either 12 or 24-hour display format
The ( PM ) icon will show in the aernoon under the 12-hour display
mode.
2. The feeding days can be changed at any me but the previous schedule
will be replaced and will start from the 1
st
new feeding day set.
3. The feeding mes and feeding-volume can be changed at any me and
the new sengs will be for the rest of the feeding day/s schedule.
4. Once the schedule has started, the DAYS displayed will be reduced by 1
every day at 0:00 (midnight) unl the end is reached. It will then revert
back to the original number of set DAYS and the Feed Alarm will sound.
Just press the START key to start your original program/sengs again.
5. If the mer icon is OFF and all numbers are ashing then no feeding
schedule has been set.
6. When the mer icon is ON and all numbers on the LCD display are not
ashing then the schedule has started.
7. When the Clock icon is ON the current me is displayed.
8. When the Red (LOW BATT) light FLASHES, the baeries are low and must
be replaced.
Change all the baeries as soon as possible. You will have to reprogram all
your sengs again when the baeries are changed.
9. When the LCD display shows ( Err ), the food delivery door is not closing
properly. You need to remove any food that jams the door.
1) Switch OFF the Auto Feeder, remove all food, turn your Auto Feeder
upside down.
2) Clean both doors hinges with a so brush.
3) Aer cleaning switch ON the Auto Feeder and rell with food.
10. Note: You will have to reprogram all your original sengs before you
can use your feeder again.
11. Always use the Quick Setup Guide for fast easy programming. If you want
more advanced features, use the this Instrucon Manual.