User Manual

8
Using the appliance
Start the appliance by turning the on/o buon to posion 1 (low speed) or
2 (high speed).
The low speed seng is suitable for juicing so fruit and vegetables.
The high speed seng is suitable for juicing harder fruits and vegetables.
Feed the selected fruits/vegetables into the appliance through the funnel a
lile at a me, pushing them down using the tamper provided.
Make sure that you turn the tamper so that the groove in the plunger ts
into the funnel properly.
Long vegetables such as carrots should be fed into the funnels pointed end
rst.
Press the fruits/vegetables gently with the tamper, too much pressure can
reduce the amount of juice extracted and can damage the appliance.
Stop the appliance before removing the tamper to add more fruit/
vegetables in order to avoid any splashing
Always keep an eye on the fruit pulp holder and stop juicing before the
holder becomes too full.
Always turn the power o by pressing the on/o buon to the “0” posion
before taking o the lid.
Please note: The juicer is ed with a thermal cut o switch which is designed to
switch o the juicer if the motor becomes over-heated. If the juicer suddenly stops
working, allow it too cool down for 5 minutes and try the juicer again.