User Manual
7
Assembly
1. Place the motor secon (6) onto a at stable surface. Make sure the speed
dial (11) is facing towards you.
2. Fit the spout support (7) into the motor secon (6).
3. Clip the centrifugal bowl (4) into the spout support (7). A “clicking” sound
will signal it has been correctly assembled.
4. Carefully place the funnel (2) onto the top of the spout support (7). Ensure
that the clips of the funnel (2) t into the spout support (7) slots.
5. Raise the locking mechanism (10) and rmly lock it into place on the funnel
(9).
6. Aach the fruit pulp holder (8) under the lip of the funnel (2). Raise it at an
angle then slide the boom in place.
7. Place the jugs lid on top of the jug (3) and place it underneath the spout.
8. Plug the appliance power cord into the electrical socket.
9. Turn the appliances speed dial (11) to 1.
10. Place the ingredients into the funnel (2) and press the ingredients down into
the centrifugal bowl using the plunger (1). Increase the speed to 2 if
necessary.