Owner's manual

Before rst me use

 Clean the top cover and measuring cup. Do not immerse the appliance in

water.

Making popcorn

 Fill the measuring cup with corn kernels.

 Pour the corn into the popping chamber.

 Place the top cover and measuring cup on top of the base unit. The top

cover ts into the groove on the base and the measuring cup ts into the top

cover. Put a heat-resistant bowl under the popping chute to collect the

popcorn. Warning! Use a suitably sized bowl under the chute to collect the

popcorn and avoid holding the bowl as the popcorn produced is hot.

4. Plug the appliance into an electrical socket and put the switch to posion

“1”. The popcorn will be ready in approximately 3 minutes. Once it has

nished making the popcorn turn the switch to the “0” posion and unplug

the cord. Do not place buer in the machine.

5. The measuring cup can also be used as a buer cup: if buer corn is desired,

put 2 teaspoons of melted buer or margarine into the measuring cup and

pour the melted buer over the popcorn.

6. You can now add other ingredients to the popcorn, if you wish.

Noce

 When using the popcorn maker repevely ,remove the un-popped corn

from the machine aer every use.

 Follow steps 1-5 for the second poron.

 Allow the machine to cool down for at least 10 minutes by switching o the

power aer 2 consecuve uses.

 The machine is designed to stop automacally when the motor has over-

heated. The machine will funcon again once the temperature has dropped

inside the appliance.