User Manual

10
Warning:
If the appliance is double insulated indicated by the double insulated symbol:
it should not have an earth wire or earth connecon.
Plug
The plug must be protected by the correct AMP fuse; this will be indicated on the
case of the plug. Only BSI or ASTA approved fuses should be used. When changing
the fuse always replace it with a fuse that is of the same idencal rang as the
original. If you are unsure about which plug or fuse to use, always refer to a
qualied electrician. Please note aer replacing the fuse, ensure that the cover is
correctly ed back onto the plug. Never aempt to run the appliance if the plug
does not have a cover. If a moulded plug is ed and has to be removed take great
care in disposing of the plug and severed cable, it must be destroyed to prevent it
from engaging into a socket. If the supply cord is damaged it must be replaced by a
service agent or a similarly qualied person in order to avoid a hazard.
All of our electrical appliances conform to pre-exisng EC Direcves 2006/95/EC
(Low Voltage Direcve) and 2004/108/EC (EMC Direcves).
For further informaon please visit hp://www.esc.org.uk/industry/product-
safety/product-tesng-screening/kitchen-appliances/