Owner manual

15
Electrical informaon
Please note:
It is extremely important that the wires or cores in the ex are connected to the
correct terminals in the plug. If the colour of the mains lead of the appliance does
not correspond with the coloured markings idenfying the terminals in your plug
proceed as follows:
The Live (Brown) wire connects
to the right- most live (L)
terminal nearest to the fuse.
The Neutral (Blue) wire connects
to the le-most neutral (N)
terminal.
The Earth (Green and Yellow)
wire connects to the central, top
most earthed (E) terminal.
Warning:
If the appliance is double insulated indicated by the double insulated symbol:
it should not have an earth wire or earth connecon.
Plug
The plug must be protected by the correct AMP fuse; this will be indicated on the
case of the plug. Only BSI or ASTA approved fuses should be used. When changing
the fuse always replace it with a fuse that is of the same idencal rang as the
original. If you are unsure about which plug or fuse to use, always refer to a
qualied electrician. Please note aer replacing the fuse, ensure that the cover is
correctly ed back onto the plug. Never aempt to run the appliance if the plug
does not have a cover. If a moulded plug is ed and has to be removed take great
care in disposing of the plug and severed cable, it must be destroyed to prevent it
from engaging into a socket. If the supply cord is damaged it must be replaced by a
service agent or a similarly qualied person.