Owner manual
4
place the unit on a hot surface.
Always remove the plug of the appliance safely. Do not pull on the
appliances cord to remove the appliance plug from the electrical socket.
Never handle or operate the appliance with wet hands.
Using the appliance
First check that the voltage marked on the product is equal to or greater
than your supply voltage.
Select a suitable posion (close to an electric socket) on a dry and even
surface.
Make sure the control buon is turned to the minimum seng and plug in
the appliance.
There is an invisible protecve coang applied on the hot plates as part of
the manufacturing process. This protecve coang must be removed
before you can use the appliance for the rst me. In order to do this, set
the control to the maximum seng and leave it switched on for approx. 10
minutes. Make sure that the room is properly venlated, as smoke will
develop. This is not a cause for concern; it is the process by which the
protecve coang is removed. Switch o the hot plate and allow it to cool
completely.
Always use at-boomed saucepans, which make good contact with the
hot plate. The saucepan bases should ideally be of the same size as the hot
plates.
Select the temperature. The hot plate has a range of temperatures.
Due to the construcon of the hotplate, residual heat will remain aer you
switch it o. This may be used to keep food warm for a short period of
me. Aer use, turn the temperature dial to minimum and unplug the
appliance from the electrical outlet.