Manual

7
How to set the clock
 When connected to the mains power, the LCD will display 12:00, the run and
auto indicator light will not be turned on.
 Press the “PROG” buon once and the LCD will display the word “CLOCK” in
the LCD display.
 The clock can now be set.
 Press the HOUR buon once and the me will increase by 1 hour. Holding
the HOUR buon will increase the hourly me quicker.
 Press the HOUR buon unl the correct hourly me is set on the LCD display.
 Once you have selected the correct hourly me, press the MIN buon to set
the correct me by holding the MIN buon again this will increase the
minutes on the clock quicker.
 Once the correct me has been set press the PROG buon once and the
“TIMER” indicator will be displayed in the LCD display. Press the PROG
buon again and the TIMER indicator will disappear, the clock has now been
set up.
 If the machine is turned o by the mains the LCD display clock will be turned
o and will have to be set again.
How to set the mer of the Coee Maker
 The Andrew James Automac Filter Coee maker can be programmed to
begin making coee at a selected using the (PROG) mode with the built in
mer facility.
 Make sure the correct me on the clock is shown on the LCD display.
 Press the PROG buon twice so that the word “TIMER” is displayed in the
LCD display, this means the mer can be set up.
 Press the HOUR buon once and the me will increase by 1 hour. Holding
the HOUR buon will increase the hourly me quicker on the mer.
 Press the hour buon unl the correct hourly me is set on the LCD display.
 Once you have selected the correct hourly me, press the MIN buon and