Operating instructions

Assembly and use of the mixer

1. Make sure the mixer is unplugged from the

mains outlet. Open the upper housing cover (3)

using the small knob (4) (this should be in the

down posion) and place the ingredients in the

mixing bowl (8). (g. 1.1)

2. Place the mixing bowl (8) on the mixer plate, and

turn the mixing bowl in an an-clockwise

direcon unl the bowl is in a xed posion. (g.

1.2)

3. Fix the bowl cover into the locking plate on the

underside of the housing cover. Then x the

beater blade (1), dough blade (10), balloon whisk

(9) or the exible beater (11) into the blade

connector and rotate the blade connector

clockwise unl it locks rmly. (g. 1.3)

4. Turn the small knob (4) in the direcon of the

arrow (on the machine) and press the housing

cover (3) downwards with one hand. (g. 1.4)

5. Insert the power plug into the power socket.

Turn the switch (5) to desired speed posion 1-6.

6. When the mixture is nished turn the switch (5)

to the “0” seng and unplug the mixer from

the mains socket.

7. Once all the moving parts have come to a

complete stop, li up the upper housing cover

(3) by turning the small lever (4) clockwise. You

can now remove the mixing bowl (8) from the

mixer plate and remove the ingredients.

Fig. 1.1

Fig. 1.2

Fig. 1.3

Fig. 1.4

Fig. 1.5