Instruction manual

Assembly and use of the mixer

1. Make sure the mixer is unplugged from the

mains outlet. Open the upper housing cover (14)

using the small lever (this should be in the down

posion) and place the ingredients in the mixing

bowl (4). (g. 2.1)

2. Place the mixing bowl (3) on the mixer plate, and

turn the mixing bowl in an an-clockwise

direcon unl the bowl is in a xed posion.

(g. 2.2)

3. Fix the bowl cover (18) into the locking plate on

the underside of the housing cover. Then x the

beater blade (10), dough blade (12) egg whisk

(11) or the exible beater (17) into the blade

connector and rotate the blade connector

clockwise unl it locks rmly. (g. 2.3)

4. Turn the small lever (4) in the direcon of the

arrow (on the machine) and press the housing

cover (14) downwards with one hand. (g. 2.4)

5. Insert the power plug into the power socket.

Turn the speed control dial (8) to the “P” seng

for pulsing or to the desired speed posion from

1-6 for longer usage.

6. When the mixture is nished turn the speed

control dial (8) to the “0” seng and unplug the

mixer from the mains socket.

7. Once all the moving parts have come to a

complete stop, li up the upper housing cover

(14) by turning the small lever (4) clockwise you

can now remove the mixing bowl (3) from the

mixer plate and remove the ingredients. (g. 2.5)

Fig. 2.1

Fig. 2.2

Fig. 2.3

Fig. 2.4

Fig. 2.5