User's Manual

Andrew Wireless Solutions

Propriety – Use pursuant to Company Instruction

9 of 9

Installation and Operation Set-Up

The MCPA is easy to operate and use, requiring no special cabling since the main

in/put/output and +27V DC @ 30A, power connections are all blind mated into a

backplane. The input signals are also distributed to the amplifiers via the sub rack wiring

from a front RF connector.

FCC Statements:

FCC ID: S8L-100951MCPA & FCC ID S8L-100963MCPA

This devise complies with Part 2, 15,22& 24 of the FCC Rules. Operation is subject to

the following two conditions: (1) this device may not cause harmful interference and (2)

this device must accept any interference received, including interference that may cause

undesired operation.

Warning

Changes of modifications not expressly approved by the manufacturer could void the

user’s authority to operate the equipments.

RF exposure compliance is addressed at the time of licensing, as required by the

responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3).

Industry Canada Statements:

IC:2237F-100963MCPA & IC:2237F-100951MCPA

1. Quality Norms : The testing of the equipment is carried out as the norms laid in IC

standards.

2. Labeling : MCPA 1900 & MCPA850 when sold in Canada will have:

(a) The certification number, prefixed by the term "IC: ", i.e. IC:2237F-100963MCPA or

IC: 2237F-951MCPA

(b) The manufacturer's name, trade name or brand name, i.e. Andrew Corporation

Model Number: RF100963 or RF100951

(d) This device complies with RSS-131, RSS-102 of the IC Rules.