Instruction Manual

[SNR_Complete]
15
English 12 Adjusting the Backpack Battery
► Swing the lever (4) down until it snaps into place.
NOTICE
Make sure the battery is securely attached to the harness
before starting work.
11.2.2 Removing the Battery and Connecting Cord from the
Battery Harness
► Open the lever.
► Remove the battery.
► Remove the plug from the battery harness.
12.1 Adjusting the Battery Harness to Suit the
Operator’s Height
The battery harness can be set to positions S, M or L to suit
the operator’s height.
► Depress the locking tab (1) and push it in the direction of
the arrow.
► Remove the slide (2).
► Line up mark (3) with mark (4).
► Insert the slide (2).
► Pull the slide up (opposite the direction of the arrow).
It will engage with a click.
► Adjust the slide at the left and right shoulder straps to the
same position.
12.2 Positioning the Connecting Cord
WARNING
To reduce the risk of injury from tripping on the connecting
cord or losing control of the power tool, always secure the
connecting cord with the hook and eye fasteners as
described below. Always position and secure the connecting
cord so that it will not interfere with the proper working
technique as described in the instruction manual for the
power tool you are using, or your ability to maintain control
of the power tool.
WARNING
Manage the cord to prevent it from contacting the
cutting/working attachment or catching on objects, which
could cause you to lose balance or control of the power tool,
resulting in serious personal injury and property damage.
The connecting cord can be secured in different positions
and adjusted to suit the height and reach of the operator.
12 Adjusting the Backpack Battery
1
2
2
0000-GXX-A271-A0
S
M
L
4
3
2
2
2
0000-GXX-A272-A1