Assembly Instructions

STEP 9

1.Attach the center support panel (5) to pre-assembly rear support board (4) and arch

shelves (3) by inserting wood dowels into holes on center support panel (5).

2. Insert 4 wood dowel (C) into the holes on the end of top cross bar (11).

3. Attached the top cross bar to center support panel (5) by inserting the wood dowel

STEP 10

1.Attach rear support board (4),center support panel (5) and right side panel (6) to bottom board (2)

by inserting cam bolts into cam lock holes and inserting wood dowels into dowel holes on the

rear support board (4),center support panel (5) and right side panel (6).

2. Insert the wood dowel (C) on the top cross bar (11) into the holes on the right side panel (6)

3. Insert 6 cam locks (B) into cam lock holes on rear support board (4),center support panel

(5) and

right side panel (6) separately then rotate clockwise to secure cam bolts (B) in place

by using a

Philips screwdriver.