Assembly Instructions

STEP 13

1.Attach the top board (1) to pre-assembly cabinet by inserting cam bolts into cam lock holes and inserting wood

dowels into dowel holes and inserting pin into holes on the rear support board (4) ,center support panel (5),right

side panel (6) and door (7).

2.Insert 6 cam locks (B) into cam lock holes on rear support board (4),center support panel (5) and left side panel

(6) separately then rotate clockwise to secure cam bolts in place by using a Philips screwdriver.

STEP 14

1. Insert 4 plastic holders (F) into holes on the positions that you desire for the shelf.

2. Put the shelf (8) onto the 4 holders (F).

3. Place the drawing with hole position on the wall that you desire to fix the cabinet.

4. Drill 2 holes through the hole position on the drawing.

5. Insert 2 plastic anchors (Q) into the holes.

6. Attach the cabinet in place w/holes, then insert 2 anchor screws (P) through the holes on the back top cross

bar (11) then tighten the cabinet to the wall.