ASSEMBLY INSTRUCTIONS SINGLE DOOR FLOOR CABINET W/SIDE SHELVES WHITE ESPRESSO ADULT ASSEMBLY REQUIRED This product requires assembly by an adult because of the small parts. Care should be taken in unpacking and assembling this item to keep the small parts away from children. WARNING Young children can be seriously injured or killed, if furniture tips over. Don’t use this item for a TV stand. Use angle-braces or anchors to secure furniture to the wall.
Send requests for missing or damaged parts replacements by email or call. THIS SHELF UNIT WILL HOLD UP TO 25 POUNDS PER SHELF OR A TOTAL OF 75 POUNDS. DO NOT LOAD EACH SHELF WITH MORE THAN 25 POUNDS. IF LOADED WITH MORE THAN 25 POUNDS PER SHELF AS THIS MAY CAUSE DAMAGE TO THE SHELF AND MAY CAUSE SERIOUS INJURY OR DEATH.
PARTS LIST 1 1PC TOP BOARD 2 1PC BOTTOM BOARD 3 2PCS ARCH SHELF 4 1PC REAR SUPPORT BOARD 5 1PC CENTER SUPPORT PANEL 6 1PC RIGHT SIDE PANEL 7 1PC DOOR 8 1PC SHELF 9 1PC BACK BOARD 10 4PCS LEG 11 1PC TOP CROSS BAR A 12PCS CAM BOLT B 12PCS CAM LOCK C 20PCS WOOD DOWEL D 1PC KNOB
E 1PC MACHINE SCREW 4x20mm F 4PCS PLASTIC HOLDER G 2PCS METAL PIN H 1PC MAGNET J 1PC MAGNET PLATE K 1PC SCREW 3x10mm M 2PCS WOOD SCREW 3x14mm N 16PCS LONG SCREW 4x20mm P 2PCS ANCHOR SCREW 4x40mm Q 2PCS PLASTIC ANCHOR TOOLS NEEDED FOR ASSEMBLY : FLAT & PHILIPS SCREWDRIVER (NOT INCLUDED) THE USE OF POWER SCREWDRIVER IS NOT RECOMMENED
STEP 1 STEP 1 1.Insert 3 wood dowels (C) into dowel holes on the top board (1). 2.Scerw 6 cam bolts (A) into the pre-threaded holes on the top board (1) by using a Philips screwdriver. STEP 2 STEP 2 1.Insert 3 wood dowels (C) into dowel holes on the bottom board (2). 2.Screw 6 cam bolts (A) into the pre-threaded holes on the bottom board (2) by using a Philips screwdriver.
STEP 3 STEP 3 1.Insert 4 wood dowels (C) into the dowel holes on the arch shelf (3). 2.Repeat above step for another arch shelf (3). STEP 4 STEP 4 1.Insert 2 wood dowels (C) into the dowel holes on the edge of rear support panel (4).
STEP 5 STEP 5 1.Attach the magnet (H) to the center support panel (5). 2.Insert 2 screws (M) through holes on the magnet (H) then tighten to center support panel (5) by using a Philips screwdriver. STEP 6 STEP 6 1.Insert 1 screw (K) through hole on the magnet plate (J) then tighten to door (7) by a Philips screwdriver. 2.Attach knob (D) to door (7), insert 1 machine screw (E) through hole on the door (7) then tighten to knob (D) by using a Philips screwdriver. 3.
STEP 7 STEP 7 1.Overturn the bottom board (2) , attach 1 leg (10) to the bottom board (2). 2.Insert 4 screws (N) through holes on the leg (10) then tighten to the bottom board (2) by using a Philips screwdriver. 3.Repeat the above step for another 3 legs assembly. STEP 8 STEP 8 1.Attach arch shelves (3) to rear support board (4) by inserting wood dowels into the dowel holes on the rear support board (4).
STEP 9 STEP 9 1.Attach the center support panel (5) to pre-assembly rear support board (4) and arch shelves (3) by inserting wood dowels into holes on center support panel (5). 2. Insert 4 wood dowel (C) into the holes on the end of top cross bar (11). 3. Attached the top cross bar to center support panel (5) by inserting the wood dowel (C) into the holes on the center support panel (5). STEP 10 STEP 10 1.
STEP 11 STEP 11 1. Slide in the back board (9) to the grooves on center support board (5) ,right side panel (6) and bottom board (2). STEP 12 STEP 12 1.Attach the door (7) to assembled unit by inserting pin (G) into the hole on the bottom board (2).
STEP 13 STEP 13 1.Attach the top board (1) to pre-assembly cabinet by inserting cam bolts into cam lock holes and inserting wood dowels into dowel holes and inserting pin into holes on the rear support board (4) ,center support panel (5),right side panel (6) and door (7). 2.Insert 6 cam locks (B) into cam lock holes on rear support board (4),center support panel (5) and left side panel (6) separately then rotate clockwise to secure cam bolts in place by using a Philips screwdriver. STEP 14 STEP 14 1.
ENJOY YOUR NEW CABINET NOW ! Attention Adults: The cabinet should be checked periodically for damage or loose screws/parts. Take appropriate action necessary to correct the hazard such as tightening of screws and taking any damaged parts away from the children. Thank you for purchasing this item. We hope you enjoy it, and consider purchasing other items.
