Assembly Instruction

STEP 7
STEP 7
1.Insert 4 wood dowels (A) into dowel holes on top of left side panel (2) and right side panel (1) separately.
2.Screw in 4 cam bolts (B) into the pre-threaded holes on top board (5).
3.Attach top board (5) to left side panel (2) and right side panel (1) by inserting 4 wood dowels (A) into dowel holes
on top board (5), and inserting 4 cam bolts (B) into holes on left side panel (2) and right side panel (1).
4
.Insert 2 cam locks (C) into cam lock holes on left side panel (2) and rotate clockwise to secure 2 cam bolts (B) in place.
5.Insert 2 cam locks (C) into cam lock holes on right side panel (1) and rotate clockwise to secure 2 cam bolts (B) in place.
STEP 8
STEP 8
1.Attach back board (6) to the pre-assembled cabinet by inserting 13 wood screws (G) through holes on back
board (6), then tighten into the cabinet.
2.Attach the metal bracket (P) to the back board (6).
3.Insert 1 wood screw (R) through hole on the metal bracket (P) then tighten to the back board (6) and top board (5)
by using a Philips screwdriver.