Assembly Instruction

STEP 5

1. Attach the left support board (14) to the left side panel (2) by inserting cam bolts into cam lock holes and

inserting wood dowels into dowel holes on the left side panel (2).

2. Insert 3 cam locks (C) into cam lock holes on the left side panel (2) separately then rotate clockwise to secure

cam bolts in place by using a Philips screwdriver.

3. Attach the drawer slides attach to side panel (T ) to the left side panel (2), insert 2pc wood screw (S) through the

holes on the drawer slides attach to side panel (T ) and tighten to left side panel (2).

4. Repeat the above steps to assemble right side panel (1) and right support board (15).

5. Attach the magnet plate (F) to the door (7).

6. Insert 1 wood screw (s) through hole on the magnet plate (F) then tighten to the door (7) by using a Philips

screwdriver.

7. Attach the handle (K) to the door (7).

8. Screw 2 machine screw (J) through holes on the door (7) then tighten to the handle (K) by using a Philips

screwdriver.