Assembly Instruction

STEP 3
STEP 3
1.Attach drawer slides attach to drawer (U) to drawer right side panel (10) by inserting 2 wood screws (S) through
holes on drawer slides attach to drawer (U), then tighten into drawer right side panel (10) by using a Philips
screwdriver.
2.Attach drawer slides attach to drawer (U) to drawer left side panel (9) by inserting 2 wood screws (S) through
holes on drawer slides attach to drawer (U), then tighten into drawer left side panel (9) by using a Philips
screwdriver.
STEP 4
STEP 4
1.Insert 2 wood dowels (A) into dowel holes on the left support board (14).
2.Screw 3 cam bolts (B) into pre-threaded holes on the left support board (14) by using a Philips screwdriver.
3.Insert 2 wood dowels (A) into dowel holes on the right support board (15).
4.Screw 3 cam bolts (B) into pre-threaded holes on the right support board (15) by using a Philips screwdriver.
5.Attach the hinge (E) to the left support board (14).
6.Insert 4 wood screws (D) through holes on the hinges (E) then tighten to the left support board (14) by using a
Philips screwdriver.