Assembly Instruction

STEP 1

1. Attach drawer left side panel (9) to drawer back board (11) by inserting 2 long wood screws (L) through holes on

drawer left side panel (9), then tighten into drawer back board (11) by using a Philips screwdriver.

2. Attach drawer right side panel (10) to drawer back board (11) by inserting 2 long wood screws (L) through holes

on drawer right side panel (10), then tighten into drawer back board (11) by using a Philips screwdriver.

3. Slide drawer bottom board (12) into grooves on drawer left side panel (9) and right side panel (10) and drawer

back board (11).

STEP 2

1. Screw in 2 cam bolts (B) into the pre-threaded holes on drawer front board (8).

2. Insert 4 wood dowels (A) into dowel holes on the drawer front board (8).

3. Attach drawer front board (8) to drawer left side panel (9), drawer right side panel (10) and drawer bottom board

(12) by inserting cam bolt (B) and wood dowels (A) into holes on drawer left side panel (9) and drawer right side

panel (10) separately, and inserting the edge of the drawer bottom board (12) into the groove on drawer front

board (8).

4. Insert 2 cam lock (C) into cam lock hole on drawer left side panel (9) and drawer right side panel (10) separately,

then rotate clockwise to secure 2 cam bolts (B) in place by using a Philips screwdriver.

5.Attach 1 handle (K) to drawer front board (8) by inserting 2 machine screw (J) through holes on drawer front

board (8), then tighten to the handle (K) by using a Philips screwdriver.