Operation Manual
2 3
Operating instructions
Congratulations on the purchase of your andi be free® Vent Mount Charger.
The Vent Mount Charger charges your smartphone in the car and holds it
magnetically and attaches stably to the vent. The charger rotates for an
optimal view of the display.
Please make it easy for yourself and watch the video for assembly. Just scan the QR
code and watch the instruction. Thank you very much for this.
The operating instructions contain important information about the safety,
use and disposal of the device. Before using the device, familiarize yourself in
detail with all operating and safety instructions to avoid the risk of re, electric
shock, injury and property damage. Only use accessories intended for the
andi be free® device, such as cables, power plugs, adhesive pads or similar.
Certied accessories can be found directly at:
www.wireless-charging.comwww.wireless-charging.com
Package Contents
• Wireless Vent Mount Charger
• USB to USB-C cable
• Sticky pad
• Instruction manual with safety instructions
Technical Specications
Operating frequency: 110khz ~ 148khz
Transmission power: Max 15 W
The Vent Mount Charger is designed to deliver the maximum power of up to
9 volts (V) and 3 amps (A) when using a QC2 or higher or USB-PD compatible
power supply with output of 9 Volt (V) und 3 Ampere (A). The charger adjusts
the delivered current to the smartphone in a dynamic way. The delivered
current varies depending on various factors such as temperature and system
activity.
Input QC2 or higher or PD, Minimum 18W
Output Up to 15W, qi-compatible
Requirement sticky pad from andi be free® or MagSafe compatible case
The CAR
CHARGER is not
included. Please
use a suitable
device!
Power Supply Requirement
To get the maximum performance, please use a QC3 (9V/3A) or PD power sup-
ply. Power supply with at minimum 18 watts power.