User manual

English

How to conﬁgure the Wi-Fi Repeater

You can conﬁgure the wireless repeater by connecting it to your

computer/laptop with enclosed RJ45 cable or wirelessly.

Conﬁgure the Wireless Repeater wirelessly.

1. Plug the Wireless repeater to a wall socket.

Open Connect to a Network by right-

clicking the network icon ( or ) in the

notiﬁcation area. You will ﬁnd the signal from

the Wireless Repeater. Click on ‘Connect’

then wait for a few seconds.

2. Open web browser and type http://192.168.10.1 in the

browser’s address box. This number is the default IP address

for this device.

Note: Please check whether the Wireless Repeater

accord with factory default settings if you can’t download

http://192.168.10.1. If you are still not sure what causes the

problem, you can reset the Wireless Repeater by pressing the

RESET button for a few seconds, then try again.

3. The login screen below will appear. Enter the “User Name” and

“Password” then click “OK” to login. The default User name is

“admin” and Password is “admin”.