User manual

English Svenska Norsk
9
Remote Control
7. SOURCE: Select among the different
input signal. SOURCES: DTV / ATV /
AV /SCART / YPBPR / HDMI 1/HDMI2 /
HDMI3 / PC/ USB mode.
8. INFO: Display the present screen
information such as the current channel
and the input source.
9.  : Allows you to navigate the
OSD menu and adjust the system
settings to your preference.
OK: Confirm changes in the TV menu.
Display a list of channels saved in the TV
tuner memory.
10. MENU: Display the TV settings menu.
11. EXIT: Exit the OSD (On Screen Display)
menu.
12. VOL + / -: Adjust the volume.
13. P.MODE: Select picture mode.
S.MODE: Select sound mode.
14. CH + / - : Select a channel.
15. 0-9 Number Button: Select a programme
or Select numbered items in a menu.
16. TV.RADIO Select TV program or Radio
program (DTV mode).
17.
: Return to previous viewing channel.
Note:
Remove battery during storage or when you
are not using the device for a long time.
To control the device using the remote
control, point the remote control at the device
and then press the button with the required
function.
The maximum range of the remote control is
about 5 meters with a deviation of up to +/-
30° from the perpendicular direction to the
reception sensor of the remote control on the
front side of the device. The falling capacity
of the batteries gradually reduces the remote
control range.
There must be no solid obstacles in the area
between the remote control and the device
when the remote control is being used.
During standard use the lifetime of batteries in
the remote control is about 1 year.
When the effective range of the remote
control is substantially reduced, or when
there are problems with its use, change both
the batteries in the remote control.
If you will not be using the remote control for a
longer period of time, take out both batteries
from it - in this in this way you will prevent
potential damage caused by their leakage.