User manual

English Svenska Norsk
12
Customizing TV Settings
Volume Adjustment
´ Press the VOL + / – buttons to adjust the volume.
´ If you wish to switch the sound , press the button, press the button again or the VOL + / – button
to resume audio listening.
Picture Mode
Allows you to set your preferred Picture Mode
1. Press the MENU button to display the main menu.
Press the  buttons to select PICTURE in the main
menu, then press the  or OK button, it will highlight
the option.
2. Press the  buttons to select the option you want
to adjust in PICTURE menu.
3. Press the   buttons to change the following
settings.
TIPS: 1. You can change the value of contrast, brightness, color and sharpness when the picture is
in Personal mode.
2. You can press P.MODE button on the remote control to change the Picture Mode directly.
Picture Mode Select the following types of picture enhancement: Dynamic, Standard, Mild,
Personal.
Contrast This property can adjust the highlight intensity of the picture, but the shadow of
the picture is invariable.
Brightness This property can adjust the brightness output of the picture. It will affect the dark
parts of the picture.
Colour This property can adjust the saturation of the colour based on your preference.
Tint This property may be used to compensate color change with the transmission in
the NTSC code.
Sharpness Adjust the sharpness in the detail of the picture.
Colour Temp This property can increase or reduce warm colour of the picture (red), and the
cold colour (blue) according to your preference.
Noise Reduction This property can reduce noise.
Available options: Off / Low / Middle / High.
4. Press the EXIT button to exit menu.
PICTURE
Picture Mode Standard
Contrast 5 0
Brightness 50
Colour 5 0
Tint 5 0
Sharpness 50
Colour Temp Normal
Noise Reduction Middle
PICTURE
Picture Mode Standard
Contrast
Brightness 50
50
50
50
Colour
Tint
Sharpness 50
Colour Temp Normal
Noise Reduction Middle