Datasheet

www.andersonpower.com
- 60 -
All Data Subject To Change Without Notice
“T” Handle
The “T” handle makes mating and unmating the connector easier. The
non-conductive red plastic material is strong and safe. (2) Self tapping
screws are used to secure the handle to the connector housing.
Description --------- Part Numbers ---------
Minimum Quantity ............................... 1,000 50 ........
Red “T” Handle + Hardware Bag - SB50-HDL-RED
Hardware Bag (2 Screws) - 104G17
Red “T” Handle Only 113899P1 -
#8 x 5/8” Screw (Order 2 Per Handle) H1120P55 -
“A” frame handle for SB
®
50
Handle makes mating and unmating the connector easier.
The non-conductive gray plastic material is strong and safe.
Machine screws and locknuts included.
Description - Part Number -
Minimum Quantity ...................... 200 .......
Gray “A” Handle & Hardware 997G1
| SB
®
Accessories |
| SB
®
50 CONNECTOR TEMPERATURE CHARTS |
6 AWG 8 AWG
10 AWG 12 AWG
25
50
75
100
125
0 10 20 30 40 50 60 70 80 90 100
SB
®
50
Derating vs. Ambient Temperature
Temperature (°C)
Amperes Applied
SECTION 3 SB
®
50
(2) Self-tapping
Screws
Handle
Connector
Housing
0
10
20
30
40
50
60
0 10 20 30 40 50 60 70 80 90
6 AWG 8 AWG
10 AWG 12 AWG
SB
®
50
Temperature Rise at Constant Current
Temperature (°C)
Amperes Applied
NOTE: Temperature rise charts are based on a 25°C ambient temperature. Powerclaw charts are based on #8 AWG
equivalent copper foil on board side, mated to #6 AWG conductor on wire side.
25
50
75
100
125
0 10 20 30 40 50 60 70 80 90 100110
Mini Powerclaw
Derating vs. Ambient Temperature
Temperature (°C)
Amperes Applied
SB50
0
10
20
30
40
50
60
0 10 20 30 40 50 60 70 80 90
Mini Powerclaw
Temperature Rise at Constant Current
Temperature (°C)
Amperes Applied
SB50
Screws
Handle
Connector
Housing
Locknuts